User`s guide

63230-216-217/A2 Basic Operation

9/2002 Using Tables

Viewing Real-Time Tables To view real-time tables, click the Tables tab. Two types of tables are

available. Single Device Tables let you view data from a single device. Multi-

Device Tables let you view summary data from multiple devices in the same

table.

Viewing a Single Device Table

To view a single device table, do the following:

1. Click the Tables tab.

2. Click the Single Device Tables button to display the list of available single

device tables (Figure 4).

Figure 4: Single Device Tables selection list

3. In the device list on the left side of the page, select the desired device.

The Power Server filters the tables list to show only tables that apply to

the selected device.

4. Select the desired table to view.

The table displays and the device tree view refreshes and filters the

appropriate devices compatible with that table.

The table data updates at the sample rate displayed at the bottom of the

Power Server Browser. (See“Changing the Sample Rate” on page 32 for

instructions on changing the sample rate.)

5. To view a different device using the same table, select a new device from

the device list.

6. To view a different table with the same device, click the Single Devices

Tables button to return to the Table Selection List.

7. To view a different table and a different device, click the Tables tab.

NOTE: You may first also select the table to be displayed, then select the

applicable device from the list of devices. If you select the table first, the

device tree view will refresh and filter the appropriate devices compatible

with that table.