User`s guide

Basic Operation 63230-216-217/A2

Using Tables 9/2002

6. Double-click the Powerlogic Server icon on the desktop.

7. Enter master for both username and password.

8. Double-click the Powerlogic System Setup icon on the desktop.

9. Enter master for both username and password.

10. Click File > New > Quick Table.

11. Create the quick table.

Select the Help > SMS-3000 Help > Custom Quantities and Tables >

Adding a Custom (Quick) Table menu for instructions on creating quick

tables.

12. Put the Power Server back in Run Mode. This may take up to five

minutes.

13. Once the Power Server is started, restart Internet Explorer and browse

the Power Server user interface.

14. Click the Tables tab.

The new table should now display in the table list. See Figure 4 on page

NOTE: You can also create a custom table in the SMS Table

Construction utility. To access it, click Start > Programs > Sms-3000 >

SMS-3000 PL Table Utility. Refer to Help > SMS-3000 Help > Custom

Quantities and Tables > Creating a Custom Table for instructions.