Specifications

432E4020.fm/6
24 March 2004
Communication
and supervision
WPG software tool
HTML-page generator
DB101034
Function
Very easy to use, the WPG software tool generates HTML pages for the EGX400
server. It is used to:
b select the devices connected to the server
b transfer the HTML pages corresponding to the selected devices to the server.
The WPG tool can set up HTML pages for the following devices:
b Sepam Series 20, Sepam Series 40, Sepam Series 80 and Sepam 2000
b Masterpact equipped with Micrologic A, P and H control units
b Power Meter PM500, PM700 and PM800
b Circuit Monitor Series 2000, 3000 and 4000.
The WPG tool is PC software that can be used in three languages, French, Spanish
and English.
To obtain WPG, contact your Schneider Electric representative.
HTML pages
Following transfer, the EGX400 contains HTML pages that can be used to remotely
monitor equipment under secure conditions.
b 1
st
service level based on the summary pages.
b 2
nd
service level based on specific pages for each type of device.
Summary pages
Five summary pages are available for overall monitoring of the switchboard.
They present the main measurements recorded by the devices connected to the
server.
b Page 1
v 3-phase average rms current
v active power
v power factor
b Page 2
v rms current per phase
b Page 3
v demand current per phase
b Page 4
v demand power
v peak power
v time-stamping data
b Page 5
v active power
v reactive power
v date and time of last reset of energy meters.
Specific pages for each device
A number of specific pages present detailed information on each device for in-depth
analysis, e.g.:
b operating information:
v instantaneous current per phase
v demand current per phase
v active and reactive power
v average voltage (phase-to-neutral and phase-to-phase)
v maximum unbalance
v power factor
v frequency
b event information:
v minimum and maximum current values
v maximum demand current
v date and time of last reset
b historical data:
v recording over 38 days of three user-selectable parameters (energy by default),
every 15, 30 or 60 minutes, with graphic display and data export to an Excel file.
HTML page with summary information on all the equipment in
a switchboard.
DB101035
Single device operating information HTML page.
DB101036
Single device HTML page showing historical data.