Specifications

432E2280.fm/2
9 mars 2004
Power-monitoring units
Power Meter Series PM9
Functions and characteristics
PB100646-43
The PowerLogic Power Meter Series PM9 offers all the measurement capabilities
required to monitor an electrical installation in a 4-module case (18 mm modules).
They can be used to monitor 2-, 3- and 4-wire low-voltage systems and connect to
external current transformers. With the large backlit display, you can monitor all three
phases at the same time.
Two versions are available for one or two supply voltages (230 V AC or 24 to
48 V DC):
b PM9P for basic measurements with pulse output
b PM9C for basic measurements with Modbus RS 485 output.
Applications
Panel instrumentation.
Sub-billing / cost allocation.
Remote monitoring of an electrical installation.
Characteristics
Only 72 mm wide (four 18 mm modules)
Compact design for optimised installation.
Large backlit display
Simultaneous monitoring of all three phases.
Demand power
Monitoring of subscribed-power overruns.
IEC 61036 Class 2 for energy
For sub-billing and cost-allocation applications.
Part numbers
Power Meter Series PM9.
Type Voltage Width in 9 mm modules Part no.
Power Meter PM9P 230 V AC 8 15197
Power Meter PM9C 230 V AC 8 15198
Power Meter PM9P 24 to 48 V DC 8 15275
Power Meter PM9C 24 to 48 V DC 8 15276