User guide

PowerLogic™ PM5300 series user guide Chapter 7—Alarms
© 2014 Schneider Electric All Rights Reserved 71
Setting Up Digital Alarms (continued)
13. Press ▼ to select Enable,
then press Edit.
14. Press + and - to scroll between
Yes and No.
15. Press OK to enable or disable
the alarm.
16. Press ▼ to select Priority,
then press Edit.
17. Press + and - to scroll through
priority options None, High,
Medium, or Low.
NOTE: See “Alarm Priorities”
on page 66 for more
information.
18. Press OK to set the priority.
19. Press ▼ to select Select
Digital Output, then press Edit.
20. Press + and - to scroll through
the list of digital outputs to
associate with the alarm.
21. Press OK to select a digital
output to be associated with the
selected alarm.
22. If the selected digital output
already has an association that
will be lost by making the new
selection, a confirmation
screen appears.
—Press Yes to accept the
changes and return to the
previous screen.
— Press No to keep the
existing configuration in use
and return to the previous
screen.
23. Press
▲ to save all alarm
selections and return to the
previous screen.
24. Press
▲ to save all digital
alarm selections.