Specifications

63230-507-201A1 Power Meter 750

03/2007 Section 3—Operation

Set Up Meter Mode NOTE: The meter Mode is set up using the RESET menu. Follow the

“Power Meter Setup” instructions on page 7 but select RESET instead

instead of SETUP. The meter mode is only a visualization mode. It does not

change or affect the way the PM750 performs its calculations.

Set Up I/O See Section 5 for information on setting up I/O.

Set Up Alarms See Section 6 for information on setting up alarms.

1. In RESET mode, press ###: until MODE is

visible.

2. Press MODE.

3. Select IEEE or IEC by pressing the

corresponding button below the selection.

A small triangle is displayed below the

current selection.

4. Press

1; to return to the RESET MODE

screen.

RDKDBSLN$D

)%%% )%#





