Specifications

Power Meter 750 63230-507-201A1
Section 3—Operation 03/2007
© 2007 Schneider Electric All Rights Reserved8
Set Up CTs
Set Up PTs
1. In SETUP mode, press ###: until METER
is visible.
2. Press METER.
3. Press CT.
4. Enter the PRIM (primary CT) number.
5. Press OK.
6. Enter the SEC. (secondary CT) number.
7. Press OK to return to the METER SETUP
screen.
8. Press
1; to return to the SETUP screen.

#42!4)/
  /+


02)-
3%#
#4
#4
1. In SETUP mode, press ###: until METER
is visible.
2. Press METER.
3. Press PT.
4. Enter the SCALE value: x1, x10, x100,
NO PT (for direct connect).
5. Press OK.
6. Enter the PRIM (primary) value.
7. Press OK.
8. Enter the SEC. (secondary) value.
9. Press OK to return to the METER SETUP
screen.
10. Press
1; to return to the SETUP MODE
screen.
<-
PT RATIO
1; + OK
120
1
120
PRIM
SCALE
SEC.
X