Installation guide

Safety
viii 975-0720-01-01
This manual is for use by qualified personnel only
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Battery Circuit Breakers must be installed according to the specifications
and requirements defined by Schneider Electric.
• Servicing of batteries must only be performed by qualified personnel
knowledgeable of batteries and the required precautions. Keep unqualified
personnel away from batteries.
• Disconnect the charging source prior to connecting or disconnecting battery
terminals.
Failure to follow these instructions will result in death or serious injury.
WARNING
UNINTENDED OPERATION
The use of this product with Modbus communications requires expertise in the
design, operation, and programming of the device. Only qualified persons
should program, install, alter, and commission this product. When writing
values to the device, you must ensure other persons are not working with the
device.
Failure to follow these instructions can result in death or serious injury,
and/or equipment damage.