Installation guide

Using the Configuration Wizard
975-0720-01-01 2–15
This manual is for use by qualified personnel only
9. Save the System Configuration.
If necessary, you can use the system configuration file to reconfigure the
system in the future.
To save the System Configuration:
10. In the Configuration Complete window, click Save system configuration.
11. Enter a file name. You can save the file to the default folder, or choose a
different location.
12. Click Save.
13. Enter a system description (optional). To give a description to your system
configuration, enter a name in the system description field and click OK. To
continue without entering a system description, leave the field blank and
click OK.
Note: Saved system descriptions are displayed when you restore a
configuration. (See “Restoring a Configuration” on page 2–31.)
14. Progress is displayed while configuration information is collected from all
devices. When the progress indicator closes, the system configuration file
has been saved.
Detailed Configuration Method
1. Reset devices to factory defaults.
After selecting the Detailed Configuration Method, the Factory Defaults
screen appears. When using the Configuration Wizard, it is recommended to
set all devices to Factory Defaults. If there are customized settings you want
to preserve, devices must be configured separately. See Chapter 3.
If you click Reset all devices to factory defaults, then Next, the system resets.
This process takes about 20 seconds. During this time, the pointer changes
to an hourglass and the Next button is unavailable. When the appearance of
the pointer returns to normal and the Next button is available again, the reset
has completed.
2. Set the Device Numbers for all devices.
Figure 2-16 Configuration Complete