Installation guide

System Logging
4–2 975-0720-01-01
This manual is for use by qualified personnel only
Introduction
With the system logging feature you can log any parameter broadcast from any
device on the Xanbus network. The information is logged to a comma-separated
values (CSV) text file, which can be imported directly into a spreadsheet program
such as Microsoft Excel. You can also specify several timing parameters such as
logging interval, logging duration, start of log and automatic repeating. In
addition, it is possible to have the log file sent via email to a specified address
once and/or sent to an FTP repository once the log is completed.
Getting Started
To start the logging feature, select Data Logger from the Conext Configuration
Too l View menu (see Figure 1-11 on page 1–17). It is not possible to have a
device window open while logging is in progress. Selecting Data Logger
automatically closes any device windows that are open and disables the device
buttons.
Figure 4-1 System Logging Window