User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 94 -
After viewing the information, press Esc to return to the main menu.
[2] Read Selected Node
To read data from registers on a specific node, press 2 .
Enter the routing path of the node you want to read from. You may enter the full
Modbus routing path of the node, but it is not necessary to enter trailing bytes that are
0. In the example shown, the full routing path was 7.0.0.0.0, so entering just 7 was
sufficient. A routing path of 9.24.19.0.0 could be entered as 9.24.19.
The reference value is the register address of the data you want to read. If you want
to read from more than a single register, enter the first register’s reference value.
The length is the number of consecutive data items you want to read.
In the example shown, we want to read from the device at node 7, and will read five
registers beginning with 40001, that is, registers 40001 – 40005.
Press Enter to initiate the read. The requested data will be displayed on the screen.
Press Esc to return to the main menu.
Other Operations
The rest of the functions available on the main menu will perform read and write
operations in a manner similar to the Read Selected Node function.
Performance Monitor
Microsoft provides a diagnostic tool, the Performance Monitor, as part of the Windows
operating system. Applications supporting the Performance Monitor, including the MBX