User`s guide

MBX Driver Help

Cyberlogic Technologies Inc. - 87 -

Setting Default Data To Write

Select an

MB+ Node

to configure. Click the

Default Data

button or right-click in the

Words Per Node

column and select

Default Data

from the context menu. You will see

the following screen.

By default, all specific output data words are filled with zeros. The default data can be

viewed and edited in Hex, Decimal or Binary. Select

Hex

Decimal

Binary

Display

Mode. Select a word to edit and click the

Edit

button. Enter a new data value and press

Enter

. Repeat this for every data word that you want to edit, and then click the

button.

Setting Application Exit Mode

When a user application exits, either normally or abnormally, the specific outputs

controlled by this application are either left in their last state or restored to a pre-

configured default state by the driver. The Edit Exit Mode button sets the required

behavior of the driver.

Click the

Edit Exit Mode

button. Select

Default Value

Last Value

from the list and

press

Enter