User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 81 -
Resources
Memory Address
This parameter specifies the base address of the adapter card. This address must match
the switch settings on the card and must be unique for each adapter card.
The default for this parameter is D0000.
Interrupt IRQ
When interrupt mode is selected, this parameter specifies the IRQ number for the
interrupt line used. This IRQ number must match the IRQ setting on the adapter card
and must be a unique value for each card in the system.
The default for this parameter is 5.
To change the IRQ setting on the adapter card, follow the procedure below:
5. Shutdown Windows and turn off your computer.
Single Channel SA85
Dual Channel SA85
6. If the adapter card is already installed in the computer, open the case and remove
the card. It will look similar to one of the diagrams above.