User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 72 -
Specific Inputs Configuration
Note
Up to 32 words of specific input data may be requested from each Modbus Plus node,
with the limitation that the total amount of requested data must not exceed 500 words.
Setting Words Per Node to Read
Select an MB+ Node that will provide specific input data. Click the Edit button or right-
click and select Edit from the context menu. Select the number of Words Per Node to
read from the list and press Enter .
Caution!
The specific output data from another node is accepted by a specific input data block
only if the specific input data block is configured for the sending node and the length of
the specific input data block (Words Per Node) exactly matches the length of the
specific output data block from the expected node.
Diagnostics Tab
The diagnostic features will help you to confirm that the driver is running and is properly
configured. They will also provide important help if troubleshooting or technical support
is needed.