User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 66 -
Node Address
This is the Modbus Plus node address for the adapter. Valid node addresses range from 1
to 64. The default for this parameter is 1.
Device Name
This parameter assigns a name to identify the device. The default for this parameter is
Clmbx#, where # is the selected device number.
Device Description
This is a user-assigned text for device description. During device creation, a default
description text will be assigned. The Device Description text has no effect on the MBX
device operation. However, some applications using this device may be able to show this
text.
Peer Cop
The TSXCUSBMBP adapter supports Peer Cop functionality. Refer to the Peer Cop section
if you need to configure Peer Cop support.
Reload Driver
When this box is checked, the driver will reload using the new configuration parameters
after the OK button is clicked.
Firmware Tab
The Firmware tab is available only for Rev. 2 adapters.
When you install an MBX Driver update, it may include updated firmware for the
TSXCUSBMBP Rev. 2 adapter. The Firmware tab allows you to identify the firmware
version that is currently in use on your adapter and the version that is available to be
programmed to the adapter. When a newer version is available, this tab allows you to
update the adapter.