User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 65 -
USB TSXCUSBMBP and XBTZGUMP
There are two versions of the TSXCUSBMBP, Rev. 1 and Rev. 2. Both types have a
Device Settings tab, and Rev. 2 adapters also have a Firmware tab. Unlike the other PnP
adapters, the TSXCUSBMBP adapter does not have a Resources tab.
The XBTZGUMP adapter is not licensed for full operation under Windows, so the driver
will operate only for two hours at a time. For continuous operation, use a TSXCUSBMBP
adapter. If you want to use the XBTZGUMP adapter in demo mode, the configuration
procedure is identical to the TSXCUSBMBP Rev. 2 adapter.
Caution!
The TSXCUSBMBP and XBTZGUMP adapters are powered by the USB port. Some USB
ports do not provide sufficient current to power the adapters, especially if there are
additional adapters or other USB devices on the same system. If you find that your
system cannot provide sufficient current, you should use an external, powered USB hub
for the TSXCUSBMBP and XBTZGUMP adapters.
Device Settings Tab
The Device Settings tab is available for both Rev. 1 and Rev. 2 adapters, and the
configuration requirements are the same for both versions.