Manualshelf

User`s guide

ManualsBrandsSchneider Electric ManualsNetwork RouterModbus Plus Network Bridge Multiplexer none
61626364656667686970
MBX Driver Help
Cyberlogic Technologies Inc. - 64 -
Memory Range
This parameter specifies the base address of the adapter card’s memory window. Two
memory ranges are automatically selected by the system and should not be changed.
Removing the Card
Note
The PCMCIA 416NHM21234 card supports Plug and Play and can be plugged in at any
time, before or after the system boot. However, before removal, you must exit all
applications that are using the card and stop the driver. To stop the driver, follow the
procedure below.
1. Go to the Windows
Control Panel
and double-click the
Add/Remove Hardware
icon.
2. Follow the Add/Remove Hardware wizard. Select
Uninstall/Unplug device
when
presented with a choice.
3. Select
Unplug/Eject a device
when presented with a choice.
4. Select your card from the list and complete the wizard.