User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 63 -
Node Address
This is the Modbus Plus node address for the adapter. Valid Node Addresses range from
1 to 64. The default for this parameter is 1.
Polling Interval
This parameter specifies the polling interval, in milliseconds, that the driver will use when
running in polled mode. The valid range for the Polling Interval is 20-1000 msec. The
default value is 20 msec.
Device Name
This parameter assigns a name to identify the device. The default for this parameter is
Clmbx#, where # is the selected device number.
Device Description
This is a user-assigned text for device description. During device creation, a default
description text will be assigned. The Device Description text has no effect on the MBX
device operation. However, some applications using this device may be able to show this
text.
Peer Cop
The PCMCIA 416NHM21234 card supports Peer Cop functionality. Refer to the Peer Cop
section if you need to configure Peer Cop support.
Reload Driver
When this box is checked, the driver will reload using the new configuration parameters
after the OK button is clicked.
Resources Tab
Note
A Plug and Play card, such as the PCMCIA 416NHM21234, should always use resources
automatically allocated by the system. Be sure that the Use automatic settings
check box is checked.