Manualshelf

User`s guide

ManualsBrandsSchneider Electric ManualsNetwork RouterModbus Plus Network Bridge Multiplexer none
31323334353637383940
MBX Driver Help
Cyberlogic Technologies Inc. - 34 -
After completing this procedure, you will have a fully-configured MBX device and will be
able to confirm that the driver is running and communicating with other nodes on your
network.
To begin, go to Creating a Non-PnP Device.
Creating a Non-PnP Device
1. From the Windows
Start
menu, go to the product suite you have installed. Next,
open the
Configuration
submenu and select
MBX Device Drivers
.
Running the editor for the first time displays the above screen.
The first step in configuring the MBX Driver is to set up at least one host interface
adapter. For this example, we will use the SA85 card.