Manualshelf

User`s guide

ManualsBrandsSchneider Electric ManualsNetwork RouterModbus Plus Network Bridge Multiplexer none
11121314151617181920
MBX Driver Help
Cyberlogic Technologies Inc. - 20 -
5. Choose the
Device Settings
tab.
This tab allows configuration of all parameters related to the selected adapter card.
6. Select the proper
Node Address
for your adapter card.
7. The PCMCIA 416NHM21234 card can only operate in polled mode and we
recommend that you use the default
Polling Interval
value of
20 msec
.
Proceed to Configuring Peer Cop Communications to continue.
Configuring Peer Cop Communications
1. If you will not use Peer Cop communication, clear the
Enable Peer Cop
check box,
click
OK,
and then proceed directly to Configuring the MBX Gateway Server.
If you will use Peer Cop communication, check the
Enable Peer Cop
check box and
continue with this section.