User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 107 -
The interface to the adapter card for <device name> has crashed (Crash code:
0x<hex value>). Check for possible conflicts with other devices in the system.
Try another adapter card.
May indicate a faulty card.
The slot number in the selected bus for device <device name> is not
supported by this computer system.
Invalid configuration parameter.
Unexpected error in <function name> for <device name>. Please contact
technical support of manufacturer.
Indicates a programming bug in the device driver.
<device name> was detected as the TSXMBP100 adapter card. This card is not
supported by this driver software. Contact the hardware manufacture to
upgrade to the PCMCIA 416NHM21234 card.
Since the TSXMBP100 and the PCMCIA 416NHM21234 cards use the same card ID, the
operating system cannot tell them apart. However, the TSXMBP100 card uses different
firmware and does not provide full functionality of the PCMCIA 416NHM21234 card. Only
the PCMCIA 416NHM21234 card is supported by this driver.
Device <device name> has no value for parameter <parameter name>.
Invalid configuration parameter.
Not enough memory in <paged/nonpaged> pool was available to allocate
internal storage needed for <Device Name>. The driver may not operate
correctly. Close some applications. Add more memory to your system.
Memory allocation from the specified memory pool failed. This is only a warning. The
requested operation will fail but the driver will continue to operate.
Parameter <parameter name> for device <Device name> is out of range.
Defaults to < value>. Check device configuration and restart the driver.
Invalid configuration parameter.
This is a promotional copy of the CLMbx.sys device driver. The driver will
operate for 4 hrs.
Time limited version of the driver
CLMbx.sys driver version <version number>
Version information.