User`s guide

MBX Driver Help
Cyberlogic Technologies Inc. - 103 -
Total number of data words in parameter <Parameter Name> for device
<Device Name> exceeds 500 word limit. (End of dump data has total length
value). Check device configuration and restart the driver.
This indicates an error in the configuration of the specified MBX device. Correct the
configuration and restart the driver.
Failed to open binary file <File Name> for <Device Name>. Reinstall the
product and restart the driver.
During product installation, a number of binary files, required for the adapter card
operation, are copied to the user’s hard disk. Since the indicated file could not be found,
reinstallation of the product will recopy the missing file.
<Device Name> detected unsupported binary file type in file <File Name>.
Reinstall the product and restart the driver.
During product installation, a number of binary files, required for the adapter card
operation, are copied to the user’s hard disk. Since the indicated file is not supported, it
may be corrupted. Reinstallation of the product will recopy the corrupted file.
<Device Name> detected corrupted data in the binary data file. Reinstall the
product and restart the driver.
During product installation, a number of binary files, required for the adapter card
operation, are copied to the user’s hard disk. The indicated file is corrupted.
Reinstallation of the product will recopy the corrupted file.
The USB XBTZGUMP adapter is not licensed for full operation under Windows.
The driver for <Device Name> will operate for 2 hours.
This adapter operates only in demo mode in a Windows environment.
The allowed operation time for <Device Name> (USB XBTZGUMP adapter) has
expired. The driver has been disabled.
This adapter operates only in two-hour demo mode in a Windows environment. The two
hours have expired, so the driver will not allow any further I/O operations.
Registration DLL failed to load. The I/O operations of the MBX Driver have
been disabled. Reinstall the product.
A necessary registration DLL could not be loaded. This may indicate a corrupted
installation. Repair the existing installation, or remove and reinstall the software.
Product license verification failed!. The I/O operations of the MBX Driver have
been disabled. Reinstall the product.
A registration check indicated that the software’s evaluation time has expired. Run the
Activation Wizard to authorize further use of the software.