Installation guide
Connecting a BP85 Bridge Plus
890 USE 100 00
175
7.10 BP85 Bridge Plus Specifications
BP85 Bridge Plus S pecifications (Panel/Shelf Models)
Description Name BP85 Modbus Plus Network Bridge
Part Number NWBP85000 (Single Cable)
NWBP85002 (Dual Cables)
Physical Characteristics Height 2.59 in (66 mm)
Width 11.50 in (292 mm), unit only 14.08 in
(358 mm), with mounting brackets
Depth 8.30 in (211 mm)
Weight 5.5 lbs (2.5 kg) net
6.5 lbs (3.0 kg) shipping
AC Power Requirements 115/230 VAC +15%. 47 ... 63 Hz, 10 W
Access Rear panel power connector with ON/
OFF switch
Fuse 1.0 A, 3 AG SB
DC Power Requirements 24 VDC +15%
(NW-BP85-002 only) 10 W
Access Rear panel power connector, requires
external ON/OFF switch
Fuse Requires external 1.0 A Fastblow fuse
Environmental Temperature 0 ... 60 degrees C, operating
40 ... +80 degrees C, storage
Humidity 0 ... 95%, noncondensing
Altitude 10,000 ft (3 km), maximum
EMI, Radiated
Susceptibility
MIL STD 461B RS03
EMI, Conducted
Susceptibility
MIL STD 461B CS03
Network Connections Rear Panel
Connectors
Mate with Modbus Plus drop cables