Installation guide

132 Documenting the Network Layout
890 USE 100 00
and cables. Use a larger scale on another sheet to show the overall
network layout.
W orksheet Grid Areas
Draw the cable routing path into these areas. Provide sufficient
information to enable installers to properly route the cable between site
locations. The following type of information will be useful:
V The area name or department of each site location to which the
cable is to be routed
V The identification label of the device enclosure, cabinet, or
mounting panel at each site location
V The identification label of the networked device at each site location
V The cable routing path between site locations
V The cable routing method, such as through new or existing cable
troughs, raceways or conduits
V Any additional cable installation information, such as separation
from interference sources, mounting of strain reliefs, and other
methods of securing and protecting the cable.