User manual

Magelis C - 19
3. Using XBT L100• software
C
Password configuration
Three passwords, A, B and C can be configured. Each password
consists of four ASCII characters ([0..9]+[A..Z]).
These three passwords are configured by default as "1111".
Step 3 - Configure the protocol parameters
This window appears when Protocol Parameters is selected from the
Configuration menu.
This window is used to:
- Indicate the protocol line parameters
- Enter parameters specific to the protocol
The appearance of the dialog box depends on the protocol selected.
XBT ref. Note
N200/N400/N410
NU400
R400/R410
No printer link