User manual

C - 14 Magelis

3. Using XBT L100• software

NOTE: When the version of an XBT N display unit changes, the key

legends should change (see quick reference guide).

This distinction is indicated in the list of product references by the

notation (1) or (2). For example, the reference XBT N200(1) indicates a

“control” version XBT N200 display unit, whereas the reference XBT

N200(2) indicates an “input” version XBT N200 display unit.

- By confirming with the "OK" button, a new application can be created

without using the creation wizard.

- "Clicking" on the “Next >” button guides the designer through the

creation of a new application by linking several windows (see section

"Creation with a wizard", Page 24).

- "Clicking" on the “Parameter...” button enables access to

configuration of the selected protocol parameters (see section "Step

3 - Configure the protocol parameters", Page 19).

- The check box marked “IEC61131 Syntax” is used for the Modbus

protocol to choose the syntax used for the variable addresses.

XBT ref. Note

"Input" version display unit

Example: XBT N200(2)

"Control" version display unit

Example: XBT N200(1)

Modifiable

label