User manual

Magelis B - 47
9. Setting the display unit parameters
B
 Date and time
This page is used to set the current date and time. It is also possible to
set the date and time display format.
 Entering the date and time
The date and time are entered in the same way as a variable
alphanumeric field (see section Entering a value (1), Page 36).
 Selecting the display format
The display formats are as follows:
The format can be configured using the XBT L100• program, during
display unit configuration (see chapter C, section Step 2 - Configure the
terminal parameters, Page 15).
The time format selected applies to all times and dates processed by the
software, including the dates and times printed and/or displayed in the
log and in the alarm list.
XBT ref. Note
N200 No access to the " SYSTEM" system page
N400/N401/N410
NU400
For display units in “input” mode only
15/10/2001
10:32:16
Date formats Time formats
DD/MM/YYYY 24:mm:ss
MM/DD/YYYY 12:mm:ss
YYYY/MM/DD