User manual

B - 44 Magelis
8. Printing
 Initiated by the PLC
The log is printed by means of the print command word in the dialog
table (see chapter C, section Print command, Page 77).
The log is printed in sequential order (sorted by status), with the most
recent alarm at the top.
The following information is printed for each alarm:
- The alarm number
- The name of the alarm page
- The date and time of appearance
- The date and time of acknowledgment
- The date and time of disappearance
 Print the list of current alarms
The operator can initiate printing of the alarms stored in the alarm list by
means of a system page (for more information about the alarm list, see
section Storage principle in the alarm list, Page 20)
The alarm number, the name of the alarm page, the print date, the print
time and the alarm status are printed.
XBT ref. Note
N200/N400/N410
NU400
R400/R410
No printer link
!---!-----------------------------!-------------------!--!---!---!
!NUM! ALARM LIST !DD/MM/YYYY HH:MM:SS!ON!ACK!OFF!
!---!-----------------------------!-------------------!--!---!---!
!002!VAT2:Alarm number 2 !05/03/2004 09:12:05!XX! ! !
!001!VAT1:Alarm number 1 !05/03/2004 09:10:02! ! !XXX!
!001!VAT1:Alarm number 1 !05/03/2004 09:08:48! !XXX! !
!001!VAT1:Alarm number 1 !05/03/2004 09:04:57!XX! ! !
Alarm 1 appeared, was acknowledged and then disappeared.
Alarm 2 is present but has not been acknowledged.