User manual

Magelis B - 41
7. Alarm pages
B
The left and right arrow buttons are used to scroll through the alarm list.
 Alarm log
 Log principles
Alarms are stored one after another. Once the log is full, new alarms
overwrite the oldest alarms.
In this way each alarm event (appearance, acknowledgment,
disappearance see section Appearance types, Page 20) is recorded and
time-stamped.
NOTE: In order for an alarm page to be stored in the log, the store option
must be enabled for the page (see chapter C, section Page
appearance types, Page 30).
The following functions can be executed:
- initiated by the PLC:
-print log
-clear log
- initiated by the operator:
- view log
-print log
-clear log
XBT ref. Note
N200 No alarm management
A 31/01 17:35 1/7
CONVEYOR FAULT
Switch off.
Remove the jammed part.
A 31/01 17:35 2/7
CONVEYOR FLT1
Change to N°2.