User manual

B - 40 Magelis
7. Alarm pages
 Alarm displays
When an alarm is displayed, the first line on the display unit is
preconfigured (by XBT L100•) to show:
- the dates and times of alarm appearance/disappearance and
acknowledgment
- the alarm rank in the alarm list
- the total number of alarms in the list
An alarm is displayed blinking:
 Possibility of ignoring alarms
If an alarm is displayed during operation, the ESC key can be used to
return to run mode, the alarm is still in the list, and the ALARM indicator
light changes to a steady display.
 Viewing alarms
Exit viewing alarm pages.
Scroll through the alarm page (up to 25 lines).
Scroll through the list of alarm pages.
The alarm is acknowledged on the display by pressing ENTER. The
alarm message changes to a steady display.
XBT ref. Note
N200 No alarm management
N200/N400/N410
NU400
R400/R410
No indicator lights
Line time-stamped by the
XBT ("A" for Alarm), the
alarm text appears blinking
and changes to a steady
display once it has been
acknowledged.
A 31/01 17:35 3/7
CONVEYOR FAULT
Switch off.
Remove the part.