User manual

B - 38 Magelis
5. Alphanumeric fields
 Exit input on time out
If no key is pressed for more than one minute, input mode is abandoned
automatically:
- No write action is performed to the control system
- The value prior to input is redisplayed
- Refreshment of the field, was in input mode, is active again.
 Input report
At the end of input, the pilot device is informed of how the input ended:
- Confirmation
-Cancellation
-Time out
by updating the "Report" word in the dialog table (see chapter C,
section 7. Description of dialog-table words, Page 65).
XBT ref. Note
N200/N400/N401/N410
NU400
For display units in “input” mode only