User manual

Magelis B - 35

5. Alphanumeric fields

 Input/Modification of a value

 Selection of an input field

By the operator

The input field should be visible on screen. Selection is made using the

MOD key:

Pressing the MOD key on the display unit keypad several times in

succession runs through the variable fields in input mode from left to

right and then from top to bottom.

1st time MOD is pressed:

We will assume that field no. 1 is the input field.

Field no. 5 cannot be the input field (it is not visible on screen).

If no input has been made in any field on the screen since the page

was displayed, the top left-hand field on the screen is the input field

(field no. 1).

Otherwise it is the last one to have been entered (field no. 1, 2, 3

or 4).

2nd time MOD is pressed: Input field no. 2

3rd time MOD is pressed: Input field no. 3

4th time MOD is pressed: Input field no. 4

5th time

MOD is pressed: Input field no. 1,

etc.

XBT ref. Note

N200 No scrolling

N400/N401/N410

NU400

For display units in “input” mode only

field no. 1 field no. 2

field no. 3

field no. 5

field no. 4

field no. 5

screen area