User manual

B - 30 Magelis
3. Sending commands to the control system
 Representation of command links
XBT ref. Note
N200 No scrolling
N400/N401/N410
NU400
For display units in “input” mode only
Startup
On/Off
Step-by-step
On
Impulse
(1)
The operator controls the conveyor step-by-step.
When he releases the button, the conveyor stops.
Toggle
x 2
0 = Bit variable associated with link equals 0
1 = Bit variable associated with link equals 1
(1): Link blinking to signal that the link is active