User manual

Magelis B - 11
1. Introduction: Display unit operating concepts
B
Connecting the PC and the display unit using the communication cable
is sufficient to switch the display unit to transfer mode. No other operator
action on the display unit is necessary in this mode.
Cable connection
see chapter A, section Connection, Page 11
Procedure with XBT L100•
Select the Transfer/Export (or Transfer/Import) menu.
Communication indicator light
- Indicator light off: No cable or communication
- Indicator light blinking: Exchanges between the PC and
the display unit
XBT ref. Note
N200/N400/N410
NU400
R400/R410
No indicator lights
Export: Loading the human/machine dialog application and the
control system link protocol into the display unit.
Import: Transfer of an application from the display unit to the PC.
E.g.: Serial link
RS232C
PC with
XBT L100•
E.g.: XBT-N401