User manual

B - 10 Magelis
1. Introduction: Display unit operating concepts
On power-up, the display unit automatically detects the exchange mode
(only one mode at a time) depending on the equipment connected on its
serial link.
 Transfer mode
This is the mode in which the display unit communicates with the XBT
L100• configuration software. It is used to transfer the application in both
directions.
XBT ref. Note
//
Invalid
password
Access to
protected objects
Power-up
Self-tests
Transfer
mode
PLC/Display unit
connection
Enter
password
Objects not
protected
Display unit/PC
connection
Display unit/PC
transfer
OR
Run mode