User manual

Magelis E - 9
2. Error messages
E
XBT system messages (6 languages), which can be translated by XBT
L100• in the system pages.
ALARM LIST EMPTY: No alarms logged in the terminal.
CANNOT READ DIALOG TABLE: Connection problems between XBT
<-> PLC.
CANNOT READ VARIABLE: Variable cannot be read.
CANNOT WRITE DIALOG TABLE:Writing to a protected zone or XBT
<-> PLC connection problems.
CANNOT WRITE VARIABLE: Variable cannot be written.
CONNECTION IN PROGRESS: XBT is trying to connect to the PLC.
DATE FORMAT INVALID: The date cannot be displayed because of its
format.
DIALOG TABLE AUTHORIZATION:Authorization word is incorrect.
LANGUAGE DOES NOT EXIST: Language not entered in the XBT.
LANGUAGE IMPOSED BY THE PLC: Current language determined by
the PLC.
LOG CLEARING IN PROGRESS: Following an operator request, the
log is being cleared.
OVERFLOW MIN <= VALUE <= MAX: Input of a value, which is outside
the limits.
PAGE DOES NOT EXIST:Call-up of a non-existent page.
PASSWORD IMPOSED BY THE PLC: Current password determined
by the PLC.
PRINTING STOPPED BY USER: The operator sent a request to stop
the current print job: The next job in the print buffer will be printed as
soon as the end of the line in the first print job is reached.