User manual

Magelis D - 21
2. Creation in XBT L100•
D
8. Change the backlight color to red.
9. Click on the Modify... button. Select the alarm activation bit (e.g.,
bit 4) and confirm by clicking on OK.
10. Confirm by clicking on OK.
11. Enter the following text:
 Step 6: Configuring the display unit
You wish page 2 to be displayed when the display unit is switched on:
- Click on the Terminal Parameters command from the Configuration
menu.
- In the "Default page" zone, select page 2.
- Confirm by clicking on OK.
 Step 7: Saving the application
Save the application using the Save command from the File menu
(name: N401_2_m.dop (m for Modbus)).
 Step 8: Application simulation
Verify the application using the Application Simulation command from
the Simulation menu.
MOTOR MALFUNCTION