User manual

D - 20 Magelis
2. Creation in XBT L100•
- Alarm table
- Set terminal clock
If not, use the Delete Function or Add Function buttons to define the
dialog table in accordance with the above list.
To declare the PLC dialog-table start address, click on the Modify...
button in the "Base address" zone and enter 500 in the "i" field. Confirm
by clicking on the OK button.
Click on OK to confirm configuration of the dialog table.
 Step 5: Creating alarm pages
1. Click on the icon to bring up the "New Alarm Page" window.
2. Change the backlight color to orange by clicking on the "Orange"
"backlight" check box.
3. Click on OK to link the page to bit %MW510:X0 (selected by default).
This word is assigned when configuring the dialog table.
4. Click on the icon to enable data stream printing of the alarms.
5. Click on the icon to store the alarm page in the log.
6. Enter the following text:
As the first line on this page has already been created and reserved for
time-stamping alarms, enter the alarm text starting at line 2.
7. Create another alarm page as explained in point 1.
Change guard
hopper