User manual

Magelis D - 11
2. Creation in XBT L100•
D
- Select the Insert Link command from the Edit menu (link on the right
by default).
- In "Action", select "Access to application page".
- Click on the New... button.
- Confirm the default page number (2) by clicking on OK.
- Confirm by clicking on OK in the "Insert Link" page.
Do the same on line "2 - Control" (Page 3).
To create a link on line "3 - Maintenance":
- Select the Insert Link command from the Edit menu (link on the right
by default).
- In "Action", select "Access to application page".
- Click on the New... button.
- Click on the Protection button.
- Click on the Access by password check box and then on the
Access enabled A box. Keep the default password, i.e., "1111".
- Confirm by clicking on OK in the "Protection" page.
- Confirm by clicking on OK in the "New Page" page.
- Confirm by clicking on OK in the " Insert Link 3" page.
In the navigation window (see chapter C, section Navigation window,
Page 9), click on "Page 2" in order to enter the content of this page.
GRADER
Main menu
----
1 - Display
2 - Control
3 - Maintenance
------------