User manual

D - 10 Magelis
2. Creation in XBT L100•
 Step 1: Creating the application
1. Launch XBT L100•.
2. Create a new application as described in the documentation. (see
chapter C, section Creating a new application, Page 13)
3. In the display unit type selection window, select an input mode XBT
N401 (XBT N401(2)).
4. Select the Modbus protocol (you also need to check the
IEC61131 box) and confirm by clicking on OK.
 Step 2: Creating the equipment
1. Select the Equipment Symbol command from the Configuration
menu.
2. Click on the Add... button.
3. Enter a symbol name (e.g., API_PLC) and an address (e.g., 2).
4. Confirm by clicking on OK.
 Step 3: Creating application pages
1. The page editor displays page 1, enter the text for this page:
It is possible to center certain lines by selecting them and clicking on the
button.
Now create the links to other pages.
First, go to the place you wish the link to appear (for example on line
"1 Display".
Next, to create a link:
GRADER
Main menu
----
1 - Display
2 - Control
3 - Maintenance
------------