User manual

Magelis A - 5
A
A
1. XBT N/XBT R display units
 Presentation of the range
The main functions of Magelis compact display units are:
- Displaying data issued by the control system
- Modifying control-system parameters
- Controlling a process using discrete commands
These display units communicate with PLCs via an integrated serial link
in point-to-point mode (or multipoint, multidrop for XBT N401s, NU400s,
R410s and R411s). The communication protocols are the same as for
Schneider Electric PLCs (Uni-Telway, Modbus master and slave).
 Overview of the XBT N range
RANGE CHARACTERISTICS DISPLAY MODE FRONT PANEL
XBT
N200
- 5 V DC power supply via the PLC
- Point-to-point mode link only
- Protocols: Uni-Telway, Modbus
master
- Backlit display in green
2X20
alphanumeric
Input
or
Control
XBT
N400
4X20 matrix
XBT
NU400
- 24 V DC power supply
- Preloaded application
(1)
- Point-to-point, multipoint mode link
- Modbus master protocol
- Backlit display in green
XBT
N401
- 24 V DC power supply
- Point-to-point, multipoint,
multidrop mode link
- Protocols: Uni-Telway,
Modbus master and slave
- Indicator lights
- Backlit display in green, orange or
red
- Printer link
XBT
N410
- 24 V DC power supply
- Point-to-point, multipoint,
multidrop mode link
- Protocols: Uni-Telway, Modbus
Master (and slave on the XBT
N410(2) product)
- Backlit display in green
(1) For Tesys model U motor starter