User manual

Magelis C - 49

3. Using XBT L100• software

A comparison has a variable on the left and a constant on the right.

Check boxes in front of each comparison are used to create a condition

with 1, 2 or 3 comparisons.

The "Variable" button is used to modify the variable address.

The condition does not take non-activated conditions into account

(check box empty).

A reminder of the combination then appears (in the "Field displayed if"

part) in plain text.

The variable field is displayed if the condition is TRUE, otherwise it is not

displayed.

NOTE: The conditions are only assessed when the page containing the

variable field is displayed.

 Configuring the function keys

This operation is performed by selecting Function keys from the

Configuration menu.

Function keys are configured in blocks of 4.

Blocks of keys, which cannot be configured for the terminal, are inactive.

A function key can be one of 2 types:

- "Page access" type: Access to an application or system page

- "Command" type

XBT ref. Note

N200/N400/N401/N410

NU400

For display units in “control” mode only