User manual

Magelis C - 47
3. Using XBT L100• software
C
 Enumerated lists
An enumerated list is a list of pairs of values/text. The advantage of this
type of list is that text can be displayed in a variable field according to the
value of a PLC variable.
Text type values in enumerated lists can only be in ASCII. However, text
associated with these ASCII values is written in the language of the
active page, and can therefore be written in Chinese.
In cases where the selected PLC object equals "BIT", there are only two
possible values: 0 and 1.
Selecting "Enumerated list" as the display type makes the "List..." button
active.
The "General" tab then appears as shown below:
The "Number of values" field is also active and gives the number of
values entered in the list.
The "List..." button is used to open a dialog box, which can be used to
create, modify and delete value/text pairs in the enumerated list
associated with the variable field.
Maximum value
Number of texts per list 64
Characters per text item 20
XBT ref. Note
//