User manual

C - 30 Magelis
3. Using XBT L100• software
The page name offered by default is “ALARM X” (irrespective of the
current language selection), where X is the default number of the new
alarm page.
The page number offered by default is incremented by 1 in relation to the
last page created for the current application.
The default page name is limited to 32 characters.
The appearance type of the page can also be configured (see section
Page appearance types, Page 30).
Next, indicate which bit will activate the alarm page. To do this, simply
click on the "Modify..." button.
Then simply select the activation bit.
 Page appearance types
The buttons for configuring the appearance type of pages are located on
the editor toolbar for the alarm pages (see section Editor toolbar,
Page 8).
The various types of appearance of the alarm pages are as follows:
XBT ref. Note
N200 No alarm management
N200/N400/N410
NU400
R400/R410
No printer link
Already used by
another page
Display alarm on screen (this option should be selected if you
want the alarm to appear on the screen)
Save alarm (this option should be selected if you want the alarms
to be stored in the alarm list, see chapter B, section Alarm log,
Page 41).
Print alarm (this option should be selected if you want the alarms
to be printed as a data stream, see chapter B, section Print
alarms as a data stream, Page 43).