User manual

Connecting XBT Terminals
33003962 11/2011 77
Cabling with fieldbus taps:
Connecting XBT RT511 to a PLC
XBT RT511 terminals require different cables for connecting them to individual
PLCs or fieldbus taps.
Use the Schneider cable XBT Z9980 (RS485) to connect XBT RT511 to the
following Schneider PLCs:
z Tesys Model U
z Altivar
z Lexium 05
z Zelio with communication module
z Preventa XPSMC
Connection via the Schneider cable XBT Z9980 (RS485):
To connect your XBT terminal to other PLCs or fieldbus taps refer to the lists below
showing the adequate cables.
PLC Cable
LU9 GC3 XBT Z938 (RS485)
SCA62 (multipoint) XBT Z908 (RS485)
SCA64 XBT Z908 (RS485)
TWDXCAT3RJ, TWDXCAISO XBT Z938 (RS485)