User manual

Insert Labels
46
33003962 11/2011
Insert Labels XBT RT
Overview
XBT RT terminals are delivered with 2 insert label sheets providing the following
label types to assign different texts or symbols to the keys:
z service key labels
z function key labels
z touch key labels
z blank labels
All labels are pre-cut and just have to be pressed out of the label sheet.
The ready-to-use service key, function key and touch key labels can directly be
inserted into the XBT RT terminal as described in section Inserting Insert Labels,
page 49.
To print your own text or symbols on the blank labels, use the Vijeo-Designer Lite
configuration software.
New label sheets can be ordered at Schneider with the following part numbers:
XBT Terminal Label Sheet Part Number
XBT RT500 XBLYRT00
XBT RT511 XBLYRT01
WARNING
UNINTENDED EQUIPMENT OPERATION
Make sure that the text/symbols on your insert label always correspond to what is
configured for your XBT terminal in the Vijeo-Designer Lite configuration software.
Otherwise the keys of your terminal will not initiate the actions indicated on them.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.