User manual

Insert Labels
44
33003962 11/2011
Insert Labels XBT R
Overview
XBT R terminals are delivered with an insert label sheet providing the following label
types to assign different texts or symbols to the keys:
z function key labels
z blank labels
All labels are pre-cut and just have to be pressed out of the label sheet.
The ready-to-use function key labels can directly be inserted into the XBT R terminal
as described in section Inserting Insert Labels, page 49.
To print your own text or symbols on the blank labels, use the Vijeo-Designer Lite
configuration software.
New label sheets can be ordered at Schneider with the following part numbers:
Function Key Labels for XBT R Terminals
The following function key label is provided on the label sheet of XBT R terminals.
Function key label XBT R
Function key label XBT R411 (with LEDs)
XBT Terminal Label Sheet Part Number
XBT R400 / XBT R410 XBLYR00
XBT R411 XBLYR01
WARNING
UNINTENDED EQUIPMENT OPERATION
Make sure that the text/symbols on your insert label always correspond to what is
configured for your XBT terminal in the Vijeo-Designer Lite configuration software.
Otherwise the keys of your terminal will not initiate the actions indicated on them.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.