User manual

Characteristics of the XBT Terminal Range
33003962 11/2011 19
Characteristics of the Individual XBT Terminals
Overview
The following tables list the characteristics of the individual XBT terminal versions.
NOTE: For products with a resettable fuse (XBT N410 / XBT N401 / XBT NU400 /
XBT R410 / XBT R411 / XBT RT511), switch off the power supply for 5 seconds
before resetting the fuse.
NOTE: XBT RT500 terminals are protected against accidental connection to higher
voltages (up to 30 V) but the other terminal types are not and will be damaged.
XBT Type XBT N200 XBT N400 / XBT R400 /
XBT RT500
XBT N410 / XBT N401 /
XBT NU400 / XBT R410
/ XBT R411/ XBT RT511
Electrical characteristics
Power supply Voltage 5 VDC supplied by the PLC. For the specific
cables see Connecting XBT Terminals
(see page 57).
24 VDC (200 mA max)
Voltage limits 5 V ± 5% DC, 1 W maximum 18...30 VDC, 5 W
maximum
Ripple factor 5% maximum
CAUTION
OVERVOLTAGE DAMAGE TO EQUIPMENT
Make sure to connect the following terminals only to a source providing 5 VDC.
z XBT N200
z XBT N400
z XBT R400
z XBT RT500
Failure to follow these instructions can result in injury or equipment damage.
XBT Type XBT N200 XBT N400 / XBT N410 /
XBT N401 / XBT NU400
/ XBT R400 / XBT R410
/ XBT R411
XBT RT500 /
XBT RT511
Operating characteristics
Display unit Type Backlit LCD
Capacity 2 x 20 characters 4 x 20 characters 10 x 33 characters