User manual

Glossary
33003962 11/2011 175
Main characteristics:
z external 24 VDC power supply
z point to point and multi-point connection
z 1 back-light color
static function keys
Keys placed on the front face of a terminal.
Their behavior is the same for the whole application.
You can set different functions to them (e.g. panel access, command functions).
status bar
Zone located at the bottom of a Windows window. It is used to indicate the state of
the application or active element to the developer.
status table
Part of the dialog table completed by the terminal. This word list represents the
terminal status.
system panel
A system panel is a pre-built, ready to use panel, which is systematically embedded
into an HMI application.
A system panel can be displayed either by the operator or by the equipment of the
automation system, or by the terminal itself.
It informs the operator about system or automation errors by a system popup panel.
It allows the operator to change some terminal parameters (e.g. date,
HMI language) and to navigate from one panel to others.
T
terminal
Please refer to HMI terminal.
third party
Indicates the fact that it is not a Schneider product.
As an example it can be used for:
z third party protocol
z third party PLC