User manual

Troubleshooting and Further Information
33003962 11/2011 159
Number System Message Description
#244 ALARM LIST EMPTY: No alarms logged in the terminal.
#203 CANNOT READ DIALOG TABLE: Connection problems between XBT <-> PLC.
#241 CANNOT READ VARIABLE: Variable cannot be read.
#202 CANNOT WRITE DIALOG TABLE: Writing to a protected zone or XBT <-> PLC connection
problems.
#242 CANNOT WRITE VARIABLE: Variable cannot be written.
#204 CONNECTION IN PROGRESS: XBT is trying to connect to the PLC.
#247 DATE FORMAT INVALID: The date cannot be displayed because of its format.
#201 DIALOG TABLE AUTHORIZATION: Authorization word is incorrect.
#251 LANGUAGE DOES NOT EXIST: Language not entered in the XBT.
#250 LANGUAGE IMPOSED BY THE PLC: Current language determined by the PLC.
#257 LOG CLEARING IN PROGRESS: Following an operator request, the log is being cleared.
#243 OVERFLOW MIN <= VALUE <= MAX: Input of a value, which is outside the limits.
#249 PAGE DOES NOT EXIST: Call-up of a non-existent page.
#253 PASSWORD IMPOSED BY THE PLC: Current password determined by the PLC.
#258 PRINTING STOPPED BY USER: The operator sent a request to stop the current print job. The
next job in the print buffer will be printed as soon as the end
of the line in the first print job is reached.
#255 PRINT RECOGNISED: The print request sent by the operator has been accepted
and placed in the processing buffer: it will be processed as
soon as the current print job is completed.
#254 PROTECTED ACCESS PAGE: Call-up of a page protected by password.
#256 REFUSED: PRINTING IS ALREADY IN
PROGRESS:
The same print request was sent twice in succession by the
operator before the first print request could be fulfilled. The
request is rejected.
#246 TIME FORMAT INVALID: The time cannot be displayed because of its format.
#248 WRONG PASSWORD: Input of an incorrect password.